-
- All Products, Dryer Venting, Kits
Dryer Back Adaptor Kit – 100mm
- Suited for dryers with a round outlet, the dryer back adaptor kit adheres to the back of the machine using a double-sided adhesive gasket ring.
- Read more
-
- All Products, Dryer Venting, Kits
Dryer Diverter Assembly
- Use on rear vented dryers where the centre of the outlet is within 160mm of the edge of the machine. Transfers into a 100mm round outlet for attaching flexible ducting. Fits under a standard wall mounting bracket for side/top venting.
- Read more
-
- All Products, Dryer Venting, Kits
Dryer Internal Lint Trap
- Fits directly onto dryers with a rear spigot-type outlet. Features a uniquely designed water bath trap where the fine lint missed by the dryer filter is collected on the water surface. Combine with DVS3 or DV4A diverter kits for dryers with flush outlet hole.
- Read more
-
- All Products, Dryer Venting, Kits
Dryer Lint Trap with Dryer Diverter Assembly
- A combination of the dryer diverter assembly and the dryer internal lint trap kits (above). Complete with a rear diverter pipe, it also transfers into a 100mm round outlet for attaching flexible ducting using a uniquely designed water bath trap.
- Read more
-
- Accessories, All Products, Dryer Venting, Ducting and Accessories
Dryer Vent Cleaning Brush
- Designed to clean ducting, the brush removes dangerous lint build-up, reducing drying time and extending dryer life. The dryer brush has three flexible detachable rods that can bend around ducting for efficient cleaning. Download Spec Sheet
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – 45° Elbow Duct
- Extends the DVS ducting system at a 45° angle. Designed to fit between the dryer and a standard wall mounting bracket.
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), External Venting Kits
DVS – Ceiling To Eave Kit
- Accepts dryer exhaust from in-laundry ducting option and securely vents outside. Features Back-flow control eliminates the entry of birds and vermin DVSWP Wall plate accepts DVSWO (wall outlet) Offers 2.7 metre reach from ceiling outlet to eave
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), External Venting Kits
DVS – Ceiling to Roof Kit
- Accepts dryer exhaust from in-laundry ducting option and vents outside through the roof via a mushroom cowl. Features Includes a rectangular to round diverter that fits under a standard wall mounting bracket for side/top venting Wall Plate accepts DVSWO (low profile duct) as a push-fit 3 metre reach from ceiling outlet to roof
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), In-Laundry Venting Kits
DVS – Corner Duct Kit
- Suits dryers positioned on an internal wall that need to navigate around a 90° corner to ventilate outside through a secondary wall, eave or roof. Features Top, side or bottom installation options 275mm reach from inlet centre to machine’s edge 1250mm maximum reach from inlet centre to wall corner Can be used with DVS1, DVS4 or DVS6.
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), In-Laundry Venting Kits
DVS – Inlet/Outlet Kit
- Ideal for dryers backing onto an external wall. Features Offers 360° installation option that fits under wall bracket 275mm inlet/outlet centre to centre reach
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Corner Duct
- Extends a low profile ducting system around an internal corner and navigates air from wall to wall, or wall to ceiling.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Extension Duct
- Extends a low profile ducting system by 300mm. Designed to fit between the dryer and a standard wall mounting bracket.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Inlet Duct
- Connects to dryers with a flush, rear outlet via an adhesive gasket to begin a rectangular ducting system that fits between the dryer and a standard wall mounting bracket.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Outlet – 100mm
- Converts low profile ducting to a 100mm round outlet for the connection of fire-rated, flexible ducting. Designed to fit on the edge of the dryer.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Waste Inlet
- Designed to adapt dryer outlets with a 100mm internal cavity diameter to a rectangular ducting system.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Low Profile Waste Outlet
- Designed to plug into the DVSWP - Wall Plate to continue outside through an external ducting kit option. Female end accepts regular DVS components.
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), In-Laundry Venting Kits
DVS – Rectangular to Round Kit
- This kit reaches the nearest edge of the dryer, where it is continued via flexible duct and any DVS external ducting option. Features Top, side or bottom installation options 275mm reach from inlet centre to machine’s edge
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Saddle Clamp
- Galvanised for corrosion protection, this saddle clamp helps to secure the 190mm width of the DVSI - inlet duct to the outlet on the back of the dryer, or when DVS components are mounted on a wall or ceiling surface.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Self Adhesive Gasket Ring
- DVSGR is a double-sided heat resistant self-adhesive ring for attached DVSI or DVSU around the dryer outlet or vent. 361TAPE provides an extra level of security between DVS system components.
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), External Venting Kits
DVS – Through Wall Kit (Plastic)
- Accepts dryer exhaust from in-laundry ducting option and vents outside. Features Used in conjunction with an in-laundry ducting option Back-flow control eliminates the entry of birds and vermin The wall plate also accepts DVSWO (waste outlet)
- Read more
-
- All Products, Dryer Venting, Dryer Venting System (DVS), External Venting Kits
DVS – Through Wall Kit (Stainless Steel)
- Accepts dryer exhaust from in-laundry ducting option and vents outside. Features Used in conjunction with an in-laundry ducting option Back-flow control eliminates the entry of birds and vermin The wall plate also accepts DVSWO (waste outlet)
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – USA Style Adaptor Cone
- When attached to a DVSI - Inlet duct, the DVSU acts as a female inlet connection to accept the dryer’s exhaust from appliances with male rear, and spigot-type outlets.
- Read more
-
- All Products, Components, Dryer Venting, Dryer Venting System (DVS)
DVS – Wall Plate/Plug
- Flush fitting wall or ceiling plate, the DVSWP accepts the DVSWO – wall outlet using the low profile ducting.
- Read more
-
- All Products, Dryer Venting, Kits
Fisher & Paykel Dryer Vent Kit – Long
- This kit reaches the longest edge of the dryer where you can continue to vent using FO408B Flexible Ducting. All Fisher & Paykel Dryer Ventilation Kits are specifically designed for Fisher & Paykel Dryers. Clothes dryer ventilation components have a diameter of 100mm suiting most current dryer models.
- Read more
